pena © 2014 by David Cook
The Textured Cone Effect creates a spiral tunnel using Color 1 and Color 2.|
The Textured Cone Effect is time sensitive and can use a Clock or Clock Modifier (available in the Textured Cone Options) to modify the Effect over time.
If you enable the Fit To Brush Option you will paint with the Textured Cone Effect sized to your brush.
The Textured Cone Effect has the following Options Pane:|
|Clock:||This Effect can change over time. This control lets you select which of the four Clocks to use (Clocks are assigned in the Brush Pane). Any Green Colored Clock is the one currently in use. Tap the reset button and a Pop Up will appear that lets you reset any of the four Clocks to their initial value. Yellow colored clocks are not in use. Note that you can turn Clocks off by tapping a Green Clock turning all of them yellow.|
|Clock Modifier:||This value is added to the current Clock. You can use this to change where in time this Effect is, relative to the Clock (this allows different Effects to use the same Clock with different offsets).|
|Simplicity:||This value sets the amount of twist in the spiral. Low values impart little twist. High values impart a large degree of twist.|
|X Position:||This value sets the offset in the X (horizontal) direction for the center of the cone.|
|Y Position:||This value sets the offset in the Y (vertical) direction for the center of the cone.|
|Zoom:||This value sets the zoom of the cone. Large numbers zoom into the cone. Small numbers zoom out of the cone.|
|Fit To Brush:||If set to a Red X the Effect spans the screen such that as you paint you reveal the Effect. When set to a Green Check Mark the Effect is sized to the brush such that as you paint the entire Effect is within the brush itself.|
|Output Color 1:||By default this is set to REPLACE which means that the set color will be output to Color 1. You can change this as explained in Options Pane Color Mixers.|
|Output Color 2:||By default this is set to IGNORE which means that the Color 2 will be ignored (the original Color 2 will be kept). You can change this as explained in Options Pane Color Mixers.|
The following image shows the Textured Cone Effect with its default settings and Color 1 set to white and Color 2 set to a red:|
In this next image we have set a lower Zoom value, allowing us to see the entire cone.
This next image shows the default values with a Simplicity set to the minimum. Note that there is virtually no twist:
This next image shows the default values with a Simplicity set to the maximum showing a high degree of twist:
Apple®, the Apple logo, iPad, iPad Air, iPad Mini, iPod, iPhone, and iTunes
are trademarks of Apple Inc., registered in the U.S. and other countries.
Wacom®, and Wacom Intuos Creative Stylus are trademarks of Wacom, registered in the U.S and other countries.